Simplex POWERSTAR 110 KW - Safety; Specifications

Page
12
3.4 Safety
In the interest of safety, the load bank is equipped with an automac system to de-
energize all the load if condions are met that may be dangerous to the operator or
could damage the hardware. If the load elements aren’t cooled properly due to a fan
failure or high exhaust temperature, the load bank will de-energize any applied load.
Aer operaon, the load bank has an auto cool down feature to prevent burns and
injury during transportaon aer use.
3.5 Specicaons
The table below shows the operaon KW at the various voltages across the Powerstar
and the dierent model of Northstar Load Banks.
Model KW Rang 600VAC, 3Ph 480VAC, 3Ph 240VAC, 3Ph 240VAC, 1Ph 230VAC, 1Ph 208VAC, 2Ph 208VAC, 1Ph
PowerStar 110
110 480VAC, 3Ph
110KW/132A 110KW/264A 70.4KW/293A 64.7KW/281A 82.5KW/229A 52.9KW/254A
NorthStar 125 125 208VAC, 3Ph
125KW/345A 80KW/385A
NorthStar 150 150 600VAC, 3Ph
150KW/145A 96KW/115A 24KW/58A
Table 1 Specications of Load Banks