Simplex POWERSTAR 110 KW - Operating Instructions; Introduction; Overview of Load Bank HMI Software; Screen Explanation

Page
16
6.0 OPERATING INSTRUCTIONS
6.1 Introducon
The load bank was designed with simplicity in mind. The hardware is simple to use and
easy to maintain.
Using a hand-held interface, the load bank can apply a desired load to a target device.
In this secon, you will nd:
— An overview of the load bank’s HMI.
— How to properly handle the load bank.
— How to start the load bank, apply a load, and shut down the load bank.
6.2 Overview of Load Bank HMI Soware
In order to apply a load using the load bank, you must use the hand-held HMI
touchscreen. The HMI is loaded with a number of important features to complete your
desired tasks. It is advised to fully understand the screens of the HMI soware fully
before starng using the equipment. See Figure 2 Screen Explanaon and the related
Table 2 for a breakdown of the main screen.
Figure 2 Screen Explanation
Figure 3 Screen Explanation 2