Page
24
8.0 SUPPLEMENTAL EQUIPMENT
8.1 Introducon
In this secon, you will learn:
— About Cam-Lok cables
8.2 Cam-Lok Cables
In order apply load to the load bank from a power source, you will need to connect
via Cam-Lok cables. The required type is 15 series, single-pole detachable plug. The
communicaons cable and 120V power cable are included.
Descripon Simplex Numbers Vendor Reference
Black Female Plug 25608823 16D29-E
Red Female Plug 25608822 16D29-R
Blue Female Plug 25608820 16D29-B
Small Green Female Plug 25608811 15D22-G
Table 4 Female Cam-Lok Plugs for Input
Figure 14 Load Bank Female Cam-
Lok Plugs for Input