Page
5
• Before installing or servicing this (and related) equipment, make sure that all power
voltage supplies are completely turned o at their source. Failure to do so will result
in hazardous and possibly fatal electrical shock.
• In case of accident caused by electric shock, immediately shut down the source
of electrical power. If this is not possible, aempt to free the vicm from the
live conductor. AVOID DIRECT CONTACT WITH THE VICTIM. Use a nonconducng
implement, such as a dry rope or board, to free the vicm from the live conductor. If
the vicm is unconscious, apply rst aid and seek immediate medical aenon.
• Never wear jewelry when working on this equipment. Jewelry can conduct electricity
resulng in electric shock or may get caught in moving components causing injury.
FIRE WARNING
• Keep a re exnguisher near the hardware at all mes. Do NOT use any carbon tetra-
chloride type exnguisher. Its fumes are toxic, and the liquid can deteriorate wiring
insulaon. Keep the exnguisher properly charged and be familiar with its use. If
there are any quesons pertaining to re exnguishers, please consult the local re
department.
GENERAL WARNING
• The illustraons in this manual are examples only and may dier from your load
bank.
To Next Page
Loading...
