Simplicity 560 - Identification & Accessories

Identification & Accessories
Record your model and serial numbers
here for easy reference. The snow-
thrower I.O. tag is located on rear of
frame.
Snowthrower I.D. (Mfg. No. & Serial No.)
Engine Model
Serial Number
(See engine Owner’s Manual for loca¬
tion of serial number.).
See your dealer to purchase any of the
following accessories for your snow-
thrower.
Tire Chains:
Increase traction on snowy surfaces
(use with caution to avoid marking
surfaces). Available for all models.
Standard on some models.
The PROTECTOR Snow Cab:
Provides shelter for operator from
severe weather and blowing snow.
Available for all models.
Electric Starter Kit (120V AC):
Offers operator the convenience of
electric start. Available for all models.
Standard on some models.
Drift Cutters:
Helps break through drifts. Avail¬
able for all models. Standard on
some models.
WARNING
This unit is a “two-stage” snow-
thrower. The first stage is the auger,
which feeds the snow back into the
impeller housing. The second stage
is the impeller, which throws the
snow out the discharge chute. If
bodily contact is made with the auger
or impeller when they are rotating,
severe personal injury will o£cur. To
avoid injury, keep others and yourself
away from the auger and the dis¬
charge chute whenever the engine is
running. See Safety Rules on the
following pages.
1