Simplicity GTH Series - Page 10

Mower Installation & Removal
9. Attach the PTO rod (C, figure 6) to the tractor PTO
lever (A) in hole marked “MOW” with the spring clip
provided (D).
10. Check Mower Adjustments (page 39. Be sure to check
belt stop adjustment if loosened in step 8. If installing
for the first time, check Mower Leveling and Lift Lever
in Adjustments section.
NOTE
If belt is new, check belt tension adjustment and blade
brake adjustment again after two hours of operation.
REMOVAL
Reverse the procedure to remove the mower.
A WARNING
Take special care when working near the engine
muffler. If it is hot from recent operation it can cause
serious burns.
8