Simplicity GTH Series - Adding Gasoline; Tractor and Mower Lubrication

ADDING GASOLINE
Refer to the engine Owner’s Manual for gasoline
recommendations. Clean the area around the gas gauge/cap
before unscrewing. Install hand-tight.
A WARNING
Never add gasoline when the engine is hot or running.
TRACTOR AND MOWER LUBRICATION
Lubricate the tractor and mower as shown in figures 11 thru
16, Where an oil can is pictured, wipe the area clean, apply a
Figure 11. Lubricate Pivot Points of PTO Lever
Normal Care
few drops of medium weight (S AE 30) oil and then wipe up
any drips or spills. Where a grease gun is pictured, wipe the
fitting clean, apply two or three shots of grease, then wipe off
excess grease. Keep grease and oil off belts and pulleys.
Figure 12. Lubricate Front Axle Grease Fittings
19