Simpson 460 4 Series - Page 18

Installation
CAUTION
For AC line operation, ensure that the grounding pin of
the power plug is securely connected to an earth (power-
line) ground. Use a 3-wire grounded outlet which con-
forms to the latest National Electrical Code.
2.4.4 Battery Operation (460D)
2.4.5 Battery operation is automatic whenever cells are instailed,
the line cord is disconnected, and one of the FUNCTION switches
set to a position other than the POWER OFF position.
2.4.6 For battery installation and battery test refer to para-
graph 7.2.
2.5
2.5.1 The Simpson Electric Company warranty policy is printed
on the inside front cover of this manual. Read it carefully prior
WARRANTY
to requesting a warranty repair.
2-2
NOTE: For assistance of any kind, including help with
the Instrument under warranty, contact the nearest Au-
thorized Service Center for instructions (listed on the last
pages of this manual). If it's necessary to contact the
factory directly, give full details of the difficulty and in-
clude the Instrument model number, serial number (at
the back of the Instrument) and date of purchase. Serv-
ice data or shipping instructions will be mailed promptly.
If an estimate of charges for non-warranty or other serv-
ice work is required, a maximum charge estimate will be