Why won't my Simpson Washer fill with water?
If your Simpson Washer will not fill with water, make sure that the water taps are turned on. Also, check the inlet hoses for any blockages and clean the tap filters/washers if necessary.
What to do if Simpson SWT6041 won't spin and has water in it?
If your Simpson Washer has washed the load but won't spin and there's still water in the wash bowl, the issue could be due to: 1. An out-of-balance load: Open the lid, redistribute the load, and close the lid. 2. The lid not being fully closed: Ensure the lid is completely closed. 3. A blocked drain hose: Check the drain hose for any blockages. After checking the drain hose, wait a short while; the wash should continue.
To Next Page
General
