Troubleshooting Guide
Problem Possible Solution
1
The air puri�ier
will not turn on or
respond to the
power button
Con�irm that unit is plugged into a
powered outlet.
2
Air�low is
signi�icantly
reduced
Make sure the �ilter has the packaging
removed (see page 9).
Press the fan button to increase fan speed.
The �ilter may be blocked, replace the air
�ilter.
3
Air Puri�ier makes
unusual noise
while the fan is on
Make sure the air puri�ier is being operated
on a �irm level surface.
The �ilter may be blocked, replace the air
�ilter.
The air puri�ier may be damaged
contacted customer support.
4
Unpleasant or
musty smell coming
from the puri�ier
Do not use in a damp or wet environment.
If air �ilter becomes damp, replace �ilters
and move air puri�ier unit to a dry area.
The carbon component of the �ilter may be
exhausted, replace air �ilter.
5
Poor air
puri�ication quality
Press the fan button to increase fan speed.
Close doors and windows while using the
air puri�ier.
Make sure the �ilter has the packaging
removed (see page 9).
Replace �ilter
Operating Guidelines
The following table lists the operating parameters for this product.
Operating this product outside these speci�ications may cause system
performance issues and may even lead to personal injury and void any
warranty. Please contact Membrane Solutions
®
for further advice and
support.
Operating Parameters
Model
Membrane Solutions
®
MSA3
Rated Voltage
120 V ~ 60 Hz
Rated Power
56 Watts
Clean air delivery rate
(CADR)
118 CFM
(200 m
3
/h)
Noise level
60 dB (A)
Dimensions
7.7 x 13.1 x 21.5 Inches
(195 x 334 x 545 mm)
Operational weight
13.7 Ib (6.2 kg)
Filter Element type
A single composite �ilter element
Temperature & Humidity
Operating: 32-104℉ (0-40℃) 20-90%
Storage: 14-140℉ (-10-60℃) 20-90%
The above performance index data is obtained in a third-party
laboratory according to the international ANSI/AHAM AC-1-2006,
with speci�ic smoke particles or gaseous pollutants as the target
pollutants.
11 4
To Next Page
Loading...
