Installation guide
System Contents
Your Membrane Solutions
®
MSA3 Air Puri�ier was carefully assembled,
packaged,and shipped complete with all the parts you should require.
Unsure about something? Is there a problem?
Please contact Membrane Solutions
®
through our website
or toll-free number.
Customer Service: service@membrane-solutions.com
Toll-Free Phone: 1-866-528-4572
Step 4
Place the new �ilter into the air puri�ier
making sure it is facing the correct direction.
Air�low travels from outside to the center of
the unit. Reinstall the rear cover
After replacing the �ilter, plug the power cord
back into an electrical outlet, then hold down
the �ilter button for 3 seconds to reset the
�ilter timer, the indicator light will �lash 3times
then go out, showing the reset was successful.
(See Page 8).
Replacement Filter Part Number
Part No.
Description
HERAPF008_M Single composite �ilter element
5
10
Control panel
Panel
HEPA plus activated carbon composite �ilter
Customer Service: service@membrane-solutions.com
Toll-Free Phone: 1-866-528-4572
Please contact our customer service for purchase options:
Actual lifespan of the �ilter may vary depending on the amount of dust,
smoke, humidity, and the concentration of other airborne particles and
vapors in the air.
To Next Page
Loading...
