CP34/44/54 Introduction and safety summary Chapter 1-1
1.1 Introduction and system familiarization
Congratulations on your purchase of SIMRAD CP34/44/54 Chartplotter -
a combination of the latest GPS and SDGPS receiver technology and optional
built-in differential receiver for accurate positioning, plus: detailed cartogra-
phy; all in a unique slim-line design with a bright 7” TFT (CP34), 10” ATFT/
TFT (CP44) or 15” TFT (CP54) color display.
The electronic chart system includes a built-in world chart for rough plan-
ning and overview. The choice of chart system best suitable for the CP34/44/
54 was carefully singled out to be the C-MAP NT+ mini cards. The optional
C-MAP charts are available world-wide at your local Simrad dealer.
The Global Positioning System is at this time and age the most common
system used for navigation and positioning all over the world. Not only for
maritime use, but also for land-based applications and aviation. The satellite-
based system has been developed and is operated by the US Department of
Defense in order to provide an accurate and reliable service, which include a
24-hour global coverage.
The GPS system consists of approx. 24 satellites which orbit around the Earth
at an altitude of approx. 20,200 km.
The satellites transmit perfectly synchronized data. However, depending on
the position, the signals will reach the receiver at a slightly different time. By
adding the measured time difference to the known position of the satellites it
is possible to calculate the ship’s position to within a few meters.
The SimNet data and control network provides high speed data transfer and
control between Simrad products that are integrated as a total navigation,
steering and communication system on board.
DS34/44/54 Dual Station for the CP34/44/54 is available with a bright 7”
TFT, 10” ATFT/TFT or 15” TFT color display. The main unit and the dual sta-
tion are identical in design and operation.
How to use this manual? This manual is written for the products: CP34,
CP44 and CP54, which mainly share the same type of software. From hereon,
these models will be referred to as: CPXX.
It is a good idea if you make yourself familiar with the key functions, menu
structure and rotation of pages (screens) described in chapter 2 before you
start out, and then proceed with section 2.7 Initial start-up. For quick location
of a certain term, please check the “Glossary of terms” and the “Index” at the
back of the manual. Also, “How to get started” further on in this chapter will
give you a quick introduction to some of the features you have access to in
your new chartplotter.
To Next Page
Loading...
Need help?
General
