Creating/Editing Tracks
1. To create (or edit) a track, press the MENU key to bring up the
quick menu.
2. Scroll to Wpt/Rte/Trk then press ENT.
3. Press the PAGE key several times to change the tab to TRACKS.
4. Turn the knob to highlight “New Track...” (or desired Track number to edit) then press ENT
to bring up the “Edit Track” dialog box..
5. The Track # eld will be highlighted. You may change the number with a name if you
wish or change other settings by turning the knob until the eld is highlighted and then
press the ENT key.
6. A track can be made into a route by highlighting the “Create Route” button and press ENT.
7. To delete a track, move the highlight to “Delete” button and press ENT.
GOTO
1. From any hot key screen, press the MENU key.
2. Scroll to “GOTO...”, then press ENT.
3. From here, you can Cancel navigation, Restart from here, Waypoint,
Route and coordinates.
4. Scroll to “Waypoint...” then press the ENT. The list of waypoint will be shown.
5. Scroll to the desired waypoint number, press ENT.
6. Press the NAV key to display the RNG, BTW and other navigation information.
Setting up the AIS (PLOT) screen
1. Press the AIS hot key.
2. Press the MENU key to bring up the Quick Menu.
3. Scroll to Display Options, press ENT.
4. A list of setups will be shown.
5. Place check mark on which feature you want to appear on the AIS/
PLOT screen.
6. To zoom in, turn the rotary knob clockwise. To zoom out, turn the
knob CCW.
PLOT with Range Rings
and AIS targets
PLOT with Route
To Next Page
Loading...
Need help?
General
