Simrad NAC-2 Installation Guide

204.0 mm (8.1”)
183.0 mm (7.2”)
57.0 mm (2.2”)
180.0 mm (7.1”)
190.0 mm (7.5”)
169.0 mm (6.63”)
91.0 mm (3.6”)
Dimensions Mounting
Parts included
1. 1 x NAC-2 Autopilot Computer - IPX5
2. 1 x NAC-2 Power cable - 2 m
3. 1 x NAC-2 Drive cable - 2 m
4.
1 x NAC-2 Feedback cable - 2 m
5. 1 x NMEA 2000 Network cable - 0.6 m
6. 1 x Micro-C T-Joiner
7.
4 x Fixing screws
8. Warranty card & literature pack
NAC-2
AUTOPILOT COMPUTER
INSTALLATION GUIDE
For setup instructions, commissioning guide,
product manuals, technical specifications,
certificates and declarations,
refer to the product website:
www.simrad-yachting.com
www.bandg.com
1
2
3
4
5
6
7
*988-11144-001*
System wiring example
AP44
AUTOPILOT
CONTROLLER
2
1
NMEA 2000 Backbone
Micro-C Drop cable
Micro-C Power cable
Micro-C T-Joiners
Micro-C Terminator, 120 Ohm
Drive cable
1
T T
MFD
12/24V DC
12/24V DC
12V DC
NAC-2
COMPASS
GPS
SENSOR
DRIVE UNIT
RUDDER
FEEDBACK
6
5
4
3
2
3
4
5
6
Power
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive cable
IPX5

Simrad NAC-2 Specifications

General

Brand	Simrad
Model	NAC-2
Category	Autopilot System
Language	English