211.0 mm (8.31”)
195.0 mm (7.68”)
65.5 mm (2.58”)
92.0 mm (3.62”)
196.0 mm (7.72”)
Dimensions Mounting
Parts included
1. 1 x NAC-3 Autopilot Computer - IPX7
2. 4 x Fixing screws
3. 1 x Micro-C Drop cable (male) - 0.6 m
4. 1 x M
icro-C T-Joiner
5. 7 x Connectors
6. 1 x 30 Amp fuse
7. Spare cable grommet
8. Warranty card & literature pack
NAC-3
AUTOPILOT COMPUTER
INSTALLATION GUIDE
For setup instructions, commissioning guide,
product manuals, technical specifications,
certificates and declarations,
refer to the product website:
www.simrad-yachting.com
www.bandg.com
1
2
3
4
5
6
7
*988-11145-001*
System wiring example
AP44
AUTOPILOT
CONTROLLER
2
1
NMEA 2000 Backbone
Micro-C Drop cable
Micro-C Power cable
Micro-C T-Joiners
Micro-C Terminator, 120 Ohm
Rudder drive & Feedback cable
1
T T
MFD
12/24V DC
12/24V DC
12V DC
NAC-3
COMPASS
GPS
SENSOR
DRIVE UNIT
5
6
4
3
2
3
4
5
6
Power
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive & Feedback cable
RUDDER
FEEDBACK
IPX7
To Next Page
