20
USB port
The USB-A port can be used to connect a:
• Storage device
• Card reader
¼ Note: USB devices should be standard PC-compatible hardware.
USB connector details
Unit socket (female) - Standard USB type-A.
Ethernet
The Ethernet port(s) can be used for transfer of data and synchronization of user created data. It
is recommended that each device in the system is connected to the Ethernet network. No special
setup is required for establishing an Ethernet network.
Ethernet connector details
Unit socket (female)
Pin Purpose
1 Transmit positive TX+
2 Transmit negative TX-
3 Receive positive RX+
4 Receive negative RX-
5 Shield
Ethernet expansion device
Connection of network devices can be made via an Ethernet expansion device. Additional
expansion devices can be added to provide the required number of ports.
To Next Page
Loading...
Need help?
General
