Standby
Standby mode helps conserve power when the unit is not in use without completely turning it o.
When in standby, the screen turns o while the system and connected devices continue to run.
Select Standby from the quick access menu to enter standby.
Press the power button to exit standby mode.
¼ Note: The on-screen power button is not available when the unit is controlled by an external
switch or other units.
Screen lock
Lock the touchscreen to prevent accidental operation. Select Screen lock from the quick access
menu to lock the touchscreen. Press the power button to unlock the touchscreen.
¼ Note: The touchscreen automatically unlocks to display alarms or warning alerts even if the
touchscreen was previously locked.
Screenshot
Select Screenshot from the quick access menu to capture an image of your screen.
Images are stored on the internal memory or, if available, on a storage device inserted into the
unit.
¼ Note: If both a microSD card and USB device are inserted, images are saved to the microSD card.
11
To Next Page
Loading...
Need help?
General
