Simrad NSX - System Settings; Adjust System Settings; Your Vessel; Connectivity Settings

SYSTEM SETTINGS
Adjust system settings
On the Settings screen, you can manage system settings and settings for connected devices.
NAVICO WIFI
Your vessel (the vessel’s name)
Use to adjust vessel-specic settings. Most of the settings for your vessel were congured the rst
time the device was started.
¼ Note: The unit shows ‘Your vessel’ by default but changes as soon as you give your vessel a name
in the devices list.
Connectivity
Use to connect to a Wi-Fi network, create a hotspot, manage Ethernet connection settings,
manage Bluetooth settings, or connect to the Simrad app.
Boat network
Use to manage connected devices.
Devices
Lists all internal and external devices and modules. You can access setup options, conguration
options and view details from the list.
Sources
Lists selected sources for various functions. You can manually select sources or let the system
perform an automatic source selection for you.
Damping
If data appears erratic or too sensitive, apply damping to stabilize the data.
¼ Note: Damping values are only applied to data shown on the display where you set the damping.
27