FIRST STARTUP
When you start the unit for the rst time, or when you start it after a factory reset, you need to
complete the initial setup for language, country, timezone and scan for an existing boat network.
After that, the Welcome screen presents you with two choices:
• Select Use your device now to start using the device immediately.
¼ Note: If you select this option, you will continue to receive alert notications to complete the
device setup.
• Select Continue device setup (recommended) to complete the device setup.
From the At the dock tab, complete the details as per the on-screen prompts.
¼ Note: The On the water tab remains disabled if there are no outstanding conguration tasks.
¼ Note: All settings congured during the rst startup can be changed later.
8
To Next Page
Loading...
Need help?
General
