Simrad NSX - Alerts; Acknowledge an Alert; View Alert Messages

ALERTS
The unit continuously monitors the connected sensors and devices for alerts, system faults and
environmental changes. Alerts can be congured by setting up rules.
When triggered, an alert rule generates one of the following message types:
• Notication – a message that stays on the screen for 15 seconds and then automatically
disappears, or until you acknowledge it.
• Warning – a message that stays on the screen until you acknowledge it.
• Alarm – a message that stays on the screen until you acknowledge it. If your system’s siren
is on, it is also accompanied by an audible alarm.
Acknowledge an alert
Select Mute or swipe it towards the right of the screen to dismiss an alarm alert. A badge
continues to display on the home button until the alert is resolved.
View alert messages
To view a list of all your alert messages, select the alerts button on your home screen.
• The CURRENTLY ACTIVE section contains alarms and warnings with unresolved conditions
(the conditions that triggered the alerts still exist).
• The UNREAD section contains notications you did not acknowledge (they automatically
disappeared after 15 seconds).
• The HISTORY section contains alarms and warnings with resolved conditions, and
notications you have acknowledged.
Select the more button to manage or remove an alert.
¼ Note: The alerts list only displays alerts generated since the unit was last turned on.
21