Each of the devices must be configured with:
• the Lightweight Ethernet SFI, selected from the list of available
devices
• Installation notes, used to identify the source in the NMEA 2000
device list
NMEA 2000 to Lightweight Ethernet
Up to five NMEA 2000 devices can be configured and bridged to the
Lightweight Ethernet network.
Each of the devices must be configured with:
• a unique 4-digit Lightweight Ethernet SFI for the selected serial
port
• the NMEA 2000 source, selected from the list of available devices
• Installation notes, used to identify the device
44
Software setup | P2005/P3007 Operator Manual
To Next Page
Loading...
Need help?
General
