Functions
Displays all devices (excluding this device) sending data on the
Lightweight Ethernet network.
Diagnostics
Provides information useful for identifying an issue with the
network.
UDB
Provides information on Ethernet activity.
Groups
This function is used to control parameter settings, either globally or
in groups of units. The function is used on larger vessels where
several units are connected via a network. By assigning several units
to the same group, a parameter update on one unit will have the
same effect on the rest of the group members.
If any of the settings require discrete control, set the group to None.
Damping
If data appears erratic or too sensitive, damping may be applied to
make the information appear more stable. With damping set to off,
the data is presented in raw form with no damping applied.
Data bridge
One device on the NMEA 2000 can act as a databridge between
Lightweight Ethernet and NMEA 2000 network.
Lightweight Ethernet to NMEA 2000
Up to five Lightweight Ethernet devices can be configured and
bridged to the NMEA 2000 network.
Software setup | P2005/P3007 Operator Manual
43
To Next Page
Loading...
Need help?
General
