Simrad RD68 - Scanning and Channel Management; Dual and Tri Watch Functions

RD68 VHF
20
E03912 Issue 2.0
2.9 Dual Watch
Dual Watch allows the radio to scan between a selected working
channel and the priority channel (normally Ch16).
Note Normal VHF functions will not be available when in Dual Watch
mode. To change channel or transmit, press 16, D/W,or C to
exit Dual Watch. DSC functions can still be accessed by press-
ing DSC; however, sending a DSC call will automatically can-
cel Dual Watch.
12:52
DSC
T/W
M/S
Scan
12:52
DSC
INT
Hi
CChh1166
DD//WW
12:52
DSC
INT
Hi
CChh1166
DD//WW
INT
Hi
Lite
Rx
The RD68 will monitor the working channel and the priority channel sequentially
Press the D/W key
12:52
DSC
T/W
M/S
Scan
Select a working channel
INT
Hi
Lite
Rx