Simrad RD68 Instruction Manual

Instruction Manual
23
E03912 Issue 2.0
To re-enable an inhibited channel into the scan cycle, repeat
sequence 2:
Select channel to be enabled
then press and hold Scan
(double beep)
12:55
DSC
T/W
M/S
SSccaann
INT
SSccaann
EEnnaa
Rx
Press and
hold
2.12 Memory Scan
Like the Scan function, Memory Scan will cycle sequentially
through the channels, but only those which have been pre-
selected.
➞ Refer to the next subsection 2.12.1 for more information on
preselecting Memory Scan channels.
12:55
DSC
T/W
MM//SS
Scan
INT
Hi
Lite
Rx
12:56
DSC
Adv
Del
INT
Hi
Lite
MM//SS
Press Adv to manually
advance to the next channel in
the Memory Scan sequence
Note While in Memory Scan mode, normal VHF functions are not
available. To exit Memory Scan mode, press C or 16.

Simrad RD68 Specifications

General

Brand	Simrad
Model	RD68
Category	Radio
Language	English