Simrad RD68 - Backlighting; Changing Channels; Standard International Channels

RD68 VHF
12
E03912 Issue 2.0
2.3 Backlighting ( )
INT
Hi
LLiittee
Rx
12:40
DSC
T/W
M/S
Scan
INT
Hi
Lite
Rx
12:40
Pvt
Wx
Aux
Aux
INT
Hi
Lite
Rx
12:41
DSC
T/W
M/S
Scan
If channel selection is
not confirmed within 2
seconds (by pressing E),
the radio will revert to
the original channel
Enter the channel
number using the
numeric keypad
There are five levels of brightness – press and hold the key
to step through and release when the required level is shown.
2.4 Changing channels
2.4.1 Standard International channels
Note To select channels, the RD68 will need to be in Radio mode. If
in DSC mode, press the RAD softkey before entering the chan-
nel number.