Simrad RD68 - Backlighting; Changing Channel; Standard International Channel

Instruction Manual
9
E03912
2.3 Backlighting ( )
There are five levels of brightness - press and hold the key to
step through and release when the required level is shown.
2.4 Changing channel
2.4.1 Standard International channel
NOTE To select channels, the RD68 will need to be in Radio Mode. If
in DSC mode, press the Rad softkey before entering the channel
number.
INT
Hi
LLiittee
Rx
12:40
DSC
T/W
M/S
Scan
INT
Hi
Lite
Rx
12:40
Pvt
Wx
Aux
Aux
INT
Hi
Lite
Rx
12:41
DSC
T/W
M/S
Scan
If channel selection is
not confirmed within 2
seconds (by pressing E),
the radio will revert to
the original channel