2.5 Handset mic wall hanger
1. Hold the handset mic wall hanger at the chosen location and use a soft pencil to mark
the 2 screw hole positions onto the mounting surface.
2. If the mounting surface is:
• non-metallic, use the 2 self-tapping screws and 2 plain washers to attach the handset mic
wall hanger to the mounting surface.
• metallic, use the 2 flat screws, 2 spring washers and 2 nuts to attach the handset mic wall
hanger to the mounting surface.
3. Hang the handset mic on the handset mic wall hanger.
4. Now connect the radio.