Simrad RS40-B User Manual

| 23
Radio menus | RS40/RS40-B User Guide
Radio menus
A long press of the MENU button opens MENU SELECT page. The
following shows the menu structure (top and 2nd level only):
ALL SCAN
ALL CHANNELS + 16
MY CHANNELS
MY CHANNELS + 16
EDIT MY CHANNELS (choose channels)
DUAL WATCH
TRI WATCH
SET WATCH CHANNEL (choose channel)
TIME DISPLAY (ON / OFF)
POS DISPLAY (ON / OFF)
COG/SOG (ON / OFF)
BACKLIGHT (>)
CONTRAST (0-10)
SENSITIVITY (DISTANT/LOCAL)
UIC (>)
POWER OUTPUT (HIGH/LOW)
CH NAME (>)
KEY BEEP (0-10)
UNITS (>)
INT SPEAKER (ON/OFF)
EXT SPEAKER (ON/OFF)
GPS (>)
COM PORT (>)
TIME (>)
VESSEL CALLSIGN (>)
AUTO POWER ON (AUTO/MANUAL)
MENU TIMEOUT (0-15 MINS)
DSC FUNCTION (X)
USER MMSI (>)
ATIS FUNC TION (ON/OFF)
SEA/INLAND MODE (SEA/INLAND)
ATIS ID (>)
INDIVIDUAL ACK (AUTO/MANUAL)
POS ACK (OFF/AUTO/MANUAL)
AUTO SWITCH (ON/OFF)
TEST ACK (AUTO/MANUAL)
RX DISTR WHILE OFF (X)
DSC TIMEOUT (>)
WATCH
DISPLAY
SCAN
RADIO SETUP
DSC SETUP
ALARMS
GPS ALERT (>)
WX ALERT (>)
DSC ALARM (>)
CPA ALARM (>)
RESET
(EU country mode)
(EU country mode)
(EU country mode)
(US/CAN country mode)
(YES/CANCEL)
WIRELESS HANDSET
PAIR A HANDSET (>)
REMOVE A HANDSET (>)
AIS SETUP
AIS FUNCTION (X)
SILENT MODE (ON/OFF)
AIS DISPLAY (MMSI/NAME)
CPA (>)
TCPA (>)
CONFIG VESSEL (>)
(US/CAN & INT country modes)
(RS40-B only)
(RS40-B only)
Key:
(>) further menu options
(X) toggle selection. ‘X’ means option enabled.
Scan
This menu is for choosing a scan mode to enable, as well as
selection of the channels scanned per the MY CHANNELS list.
¼ Note: Scanning is not available if ATIS mode is turned on.
2

Simrad RS40-B Specifications

General

Brand	Simrad
Model	RS40-B
Category	Radio
Language	English