| 37
Radio menus | RS40/RS40-B User Guide
Pair a handset
Before a wireless handset can be used with the radio, it must
be paired with the radio. The pairing process only needs to be
performed once per handset (maximum of 2 handsets can be paired
to the radio):
1. Ensure the handset, that you want to pair to the radio, is charged
and turned OFF.
¼ Note: If you have another handset that is already paired to the radio,
ensure it remains off during this procedure.
2. On the base station radio’s MAIN menu, select WIRELESS HANDSET.
3. Select PAIR A HANDSET. Select YES.
4. Turn ON the handset that you want to pair to the radio. The handset
display will show SEARCHING...
5. Press and hold SCAN button on the handset until HANDSET IS
PAIRING appears.
6. Each paired handset will be identified by either HS1 or HS2 text
above the channel number.
¼ Note: This pairing process may take a few minutes to complete.
Repeat steps 2-5 to pair the second handset.
Remove a handset
To delete an already paired handset:
1. Select REMOVE A HANDSET.
2. Select the handset you wish to remove, press ENT and then YES.
Reset
Use this setting to return every setting to the factory defaults except
all MMSI settings, entries in your buddy list and any customized
channel names.
To Next Page
Loading...
Need help?
General
