| 9
| RS40/RS40-B User Guide
MMSI and ATIS ID
The user MMSI (Marine Mobile Service Identity) is a unique nine
digit number. It is used on marine transceivers that are capable of
using DSC (Digital Selective Calling).
• An MMSI remains with a vessel, even if the vessel is sold on.
• An MMSI has 9 numeric digits (xxxxxxxxx). Your MMSI must not
commence with a ‘0’.
• A Group Call ID begins with ‘0’ followed by 8 numeric digits
(0xxxxxxxx).
• A Coast Station MMSI begins with 00 followed by 7 numeric digits
(00xxxxxxx).
• By law, you are not able to change your MMSI once it is entered into
the radio. This is why there is the confirmation screen when entering
the MMSI. If you need to have the MMSI in the radio changed, the
radio must be taken back to your Simrad dealer.
• An ATIS ID is only required in certain EU countries when navigating
some inland waterways. It is usually a different number to your
MMSI.
AIS CLASS-B Safety Warning (RS40-B only)
Warning: The AIS transceiver in this RS40-B radio is an aid to
navigation and must not be relied upon to provide accurate
navigation information. AIS is not a replacement for vigilant human
lookouts and other navigation aids such as RADAR. Also, take
note that not all vessels will have an AIS transceiver turned on,
or installed. The performance of the transceiver may be seriously
impaired if not installed as instructed in the user manual, or due to
other factors such as weather and or nearby transmitting devices.
Important information for US customers
There are specific laws in the USA regarding the configuration of AIS
class B transceivers. If you are a US resident and intend to use your
AIS class B transceiver in US waters, you should make sure that your
retailer has configured your product prior to supplying it to you. If
your AIS transceiver has not been pre-configured, please contact
your dealer for details of how to have it configured.
To Next Page
Loading...
Need help?
General
