To Next Page

To Previous Page

2.2.2 Power (1/25) / Channel Memory (M+)

Although the radio has a maximum transmit power of 25

watts, this is not always necessary if communicating with a sta-

tion or vessel that is very close. To reduce power consumption,

the transmit power can be reduced to 1 watt. This key operates

as a toggle, switching between 1w and 25w (Fig 2.3).

NOTE - Some channels are restricted to 1w transmit power. The radio

is programmed to switch to low power automatically when one

of these channels is selected

RT62 & RT64

E04074

Channel Memory function

This will add the currently selected channel into the Scan

Memory. Press F then 1/25 - the LCD display will show ENT

indicating that the channel has been entered into the Scan

Memory. Pressing F then 1/25 if the channel is already in the

memory will remove it - indicated by DEL appearing on the

bottom line of the LCD display.

Fig 2.3 - Selecting transmission power (1/25W)

25W

Simrad RT64 User Manual

Other manuals for Simrad RT64