To Next Page

To Previous Page

2.7.1 User Programmable Key

To program the user key function, turn the radio off, then press

and hold the user key on the ﬁstmike while switching the radio

on (Fig 2.11) - the display on the radio will show UP (User

Programming).

RT62 & RT64

E04074

Fig 2.11 - Programming the user key to activate Dual Watch

Press and hold

while switching

the radio on

• To select backlight, press F ( on non scan versions)

• To select Dual Watch, press D/W

• To select the User Channel, press 16 (P - non scan versions)

• To select 1/25W, press 1/25

When the function has been programmed, the display will

show OK The radio should then be turned off - when it is

switched on again the radio will return to normal operation

with the ﬁstmike user key programmed as speciﬁed.

NOTE The default setting for the ﬁstmike user key is select User

Channel.

1/25

D/W

SCN

M+

Simrad RT64 User Manual

Other manuals for Simrad RT64