-ENULAYOUT
#(!24 0/3 7024%
1:Chart display 1:Position display 1:Mark, WP list
2:Turn cursor ON/OFF 2:Course and speed 2:WP used in routes
3:Chart setup 3:Dual speed 3:Delete group of WPs
4:Decca lanes 4:Routes
5:Loran C 5:Route calculation
6:MOB position 6:Trackplots
7:Position setup 7:Lines
8:Speed diagram 8:Targets
9:DGPS information 9:Data transfer
.!6 %#(/ 3%450
1:Navigation display 1:Echo display 1:Speed alarm, units & language
2:Navigation setup 2:Interface setup NMEA
(3:Cursor) 3:Interface setup remote
3:Waypoint 4:Interface setup alarm/log
4:Route 5:Wind display
(5:Track) 6:Set & drift
7:HSD Link setup
The .!6 menu is dynamic and will adapt to the function which is currently
active, see below variations:
1:Navigation display
2:Navigation setup
3:ETA
& AVN
4:Set & drift trim display
5:Turn NAV OFF
1:Anchor guard display
2:Navigation setup
3:Turn anchor guard
OFF
1:MOB display
2:Navigation setup
3:Turn MOB
OFF
#HAPTER '.-+))&UNDAMENTALSINITIALSTARTUP
12