28
Voyage
In this submenu the following navigational information can be congured:
• Destination — Ship’s next destination port (limited to 20 characters).
• ETA Date — Estimated date of arrival at destination (using UTC time).
• ETA Time — Estimated time of arrival at destination (using UTC time).
• Ship Type — use direction keys to select the type of vessel from the list.
• Ship Cargo — use direction keys to select the type of vessel from the list .
• Navigation status — use direction keys to select the suitable status from the list.
• Person — the number of person on board.
⚠
WARNING: If Ship Type is Tanker, by regulation, whenever the ship navigation status is
“Moored”, the transponder’s transmission power is automatically changed to 1W for safety
measures.
At the right side of the view, you can see a block (Set1~Set5) when pressing
, you can input the
setting name and then the system will save the current voyage setting to this Set.
Next time, if you want to use the same setting, just select the Set, you saved, and press
. The system
will apply the setting to the current voyage value.
To Next Page
Loading...
