43
Sensor Status
Display sensor statuses:
Sensor Status
Position Status External position source other than GNSS
Internal GNSS in use
External GNSS in use
Internal DGNSS in use (corrected; beacon)
Internal DGNSS in use (corrected; Message 17)
External DGNSS in use
Position Quality No position
Manual position
Dead reckoning position
Valid position with no time stamp
Position > 10 m
Position with RAIM > 10 m
Position <= 10 m
Position with RAIM <= 10 m
Outdated position > 200 m
UTC Status Valid / Invalid (see Note)
COG Status Internal COG / External COG / Invalid
SOG Status Internal SOG / External SOG / Invalid
Heading Status Valid / Invalid
ROT Status Valid / Other ROT / Invalid
¼ Note: When the AIS is not connected with internal GPS, UTC is lost and time is unsynchronized, then the
V5043 will continue operation using indirect or semaphore synchronization.
To Next Page
Loading...
