45
Alert List
V5043 features SART/MOB alarm that can appear any time during operation.
When SART/MOB message is received, the
or icon will appear in the status bar with beeping
sounds twice from the buzzer.
There are 2 ways to access the Alert List: either through Main Menu/Navigation Operation/Alert List or
use the hot key by holding
for 3 seconds and the system will enter the Alert List screen.
Another hot key in the Alert List, by pressing
you can select the alert between the rst and the last.
The list shows all current AIS alerts and their status. Use direction keys to navigate the list.
You can acknowledge (ACK) the alert message by pressing
. The system will ask for conrmation if the
chosen alert should be acknowledged. If the alert has not been acknowledged, an indication icon
will
appear in the status bar until all acknowledgments are made.
The transponder performs a function self-check continuously. If a self-check fails an alarm will occur. The
Appendix shows all possible alarm scenarios.
To Next Page
Loading...
