Simrad V5043 - Page 46

46
Table — BAM Alert Instance
Alert ID Alert text Additional information Prio Cat Escal BIIT ID
3108 Locating
device
Check AIS targets W B W 14
3062 General
fault
Check AIS equipment W B W 6
3008 Transceiver
fail
Not transmitting, check AIS W B W 1
Not receiving, check AIS W B W 34
3015 Lost position Own ship position not transmitted W B W 26
3116 Impaired
radio
Reduced coverage (antenna VSWR) C B 2
Ch1 inoperative, check AIS C B 3
Ch2 inoperative, check AIS C B 4
DSC inoperative C B 5
3113 Sync in
fallback
Check AIS for UTC time synchronisation C B 7
3003 Lost ext
EPFS
Check external position sensor C B 25
3119 Missing COG Not transmitting COG C B 30
Missing SOG Not transmitting SOG C B 29
Missing
Heading
Not transmitting Heading C B 32
Missing ROT Not transmitting Rate of Turn C B 35
3013 Doubtful
GNSS
Int/Ext GNSS position mismatch C B 9
Doubtful
heading
Dierence with COG exceeds limit C B 11
3019 Wrong
NavStatus
Check NavStatus setting C B 10
3009 Lost MKD Cannot display safety related messages C B 8
¼ Note:
• Alert priority (Prio): W (Warning) C (Caution)
• BIIT ID 1 is generated if there is a malfunction in the transmitter hardware or the MMSI is set to “0”.