57
Debug Messages
This page displays NMEA 0183
®
sentences output by AIS.
Communication Test
Communication between V5043 and other Class A device can be tested. The procedure starts by
transmitting Message 10 to an addressed Class A MMSI. The addressed MMSI, once received Message
10, will return Message 11. The test is then complete when the transponder successfully receives the
Message 11.
Press to start the communication test. The system will show a target list that only has targets with
Class A type. Use direction keys to select a target and then press
to start the transmission of Message
10.
To Next Page
Loading...
