－10 －
●In case of the power off during the operation, all options will be
ceased.
●If need to resume the operation, please repress the "SEND" key. If
there is malfunction in the operation procedure, or wrong operation
due to the thunder, please pull out the power plug, and reinsert it,
then press the "SEND" key.
POWER OFF
HIGH
TIME
AM
MODE
FAN
SEND
TIMER
DRY
Hr
SLEEP
Min
NAMES AND FUNCTIONS OF THE REMOTE CONTROLLER
MODE
key
Press the "MODE" key step by step, the
LCD will display the COOL-FAN-HEAT-
AUTO mode, circularly.
TEMP key
Press once, the SET TEMP. will decrease
1℃. Press once, the SET TEMP. will
increase 1℃. The SET TEMP. can be
selected from 16℃-30℃
FAN key
The switchover of FAN mode are HIGH-
MD-LOW.
TIMER key
Press the key to select the SET TIMER mode or
the TIME mode. When select the "SET TIMER"
mode, the LCD will display the time of the SET
TIMER mode, while select the "TIME" mode,
the LCD will display the current time.
Hr/Min key
When the unit is running in the "TIME" mode,
press "Hr" once, the number will increase 1,
press "Min" once, the number will increase 1.
When the unit is running in the "SET TIMER"
mode, press the key once between 0-7, the
number of time will increase 0.5, press the key
once above 8, the number of time will increase
1. When the unit is running in "SLEEP" mode,
press the "Hr" key once, the time interval will
increase 1 hour, and will circulate from 1 to 7
hour(s).
ON/OFF
NOTE: When using Fahrenheit remote controller
the sign '
O
c', '+
O
c' or '-
O
c 'will be corresponding
changed to '
O
F','+
O
F' or '-
O
F'.
(61
O
F~86
Ｏ
F).
To Next Page
Loading...
