OPERATING METHODS
５
０
ｃ
ｍ
５
０
ｃ
ｍ
－4－
The working range of COOL mode is 16℃-35℃, the working range of
DRY mode is 16℃-35℃．
When operating, the unit should be placed on the horizontal place and
more than 50cm away from the wall or other obstructions.
The working range of COOL
mode and DRY mode
Location conditions
Power supply Before the unit is power-on, please check the following:
The power supply voltage
6%.
● The lead wire is suitable for the start-up current of more than 20A,
to avoid the voltage decline when the unit starts suddenly.
● The power plugs and the
sockets can be supported by the current
that is more than 16A.
● The thread section of the lead wires and any continued use lead wire
is no less than 2.5mm
2
.
● If the power supply cord is damaged, replace it by the special
power supply cord.
●
If the power supply is needed to replace or maintain, please
contact with the dealer and ask for the professional personnel to do
the repairing work.
● The air conditioner must be safety earthed. Earth wire must be
connected to the special device of the building. That is for providing
good earthing for the air conditioner.
To Next Page
Loading...
Need help?
General
