50
Installation and Maintenance
Step
Procedure
6.Remove electric box assy
、
Support (Electric box assy)
Lift the mainboard, disconnect each wiring terminal on the
mainboard; Remove screws xing the electric box assy,
remove the ground screw on the condenser and then lift
the electric box assy to remove it.
Remove screws xing the Support (Electric box assy) and
then remove the Support (Electric box assy).
7.Remove water bae
a
Remove screw xing the water bae (4-way valve);
remove screw xing the tube clip, then remove the water
bae (4-way valve).
screws
screws
mainboard
screws
screws
Water bae (4-way valve)
Tube Clip
To Next Page