Singer 14U 34B - Default Chapter; Table of Contents

CONTENTS
Page
1. Principal parts. 2
2. Preparation prior to sewing. 3
3. Threading the machine . 4
• Setting up the thread guide holder.4
• How to open looper cover .. 4
• How to remove cylinder cover...4
• How to thread your machine correctly. J . 5
• How to change threads .. 8
4. Chain off and test sew. 8
5. 1-Needle, 3-Threads overedge stitching. 9
6. How to adjust thread tension .10
7. How to adjust stitch length.12
8. How to adjust overedge seam width..12
9. How to do rolled hemming. 1 3
10. Differential feed (with differential feed machine only).15
• Gathered overedge ..15
• Stretch overedge.16
11. Free arm sewing (tubular work).17
12. Seam guide lines.17
13. Edge guide (optional parts).17
14. Variation stitch.18
• Ornamental stitching.18
• Blindstitching .19
• Braiding by chaining-off.19
• Pin tuking.20
• Turning square corners .20
15. How to replace needles . 2 1
16. How to replace stationary knife. 2 2
17. How to exchange light bulb .22
18. How to adjust presser foot pressure.22
19. Cleaning.23
20. Reasons for poor stitches and how to make adjustment. 24
21. Relationship between cloth, thread and needle.25
22. Accessories. 2 6
23. Specification. 2 6
1