Singer 201P - Page 36

To reach parts underneath
bed of machine, turn ma-
chine back on its hinges.
Apply one drop of oil to the
places indicated by the un-
lettered arrows in Fig. 33.
The gears concealed by gear cover E2, Fig. 33 are
oiled through oil hole E, Fig. 31.
The gears concealed by gear cover D, Fig. 33 are
oiled through the space just above this cover, as
indicated by arrow D2. After oiling the gears at
D2, rotate the hand wheel toward you to distribute
ae i the oil on these gears.
Fig. 33, Views, Showing Oiling Points in
Base of Machine
35