Singer 4671 - Four-Step Buttonholing Steps; Step 2: Second Buttonhole Stitching; Step 3: Third Buttonhole Stitching; Step 4: Final Buttonhole Stitches and Cutting

Step
4
* Seiect
Buttonhole Stitch
#4,
_I-6 - - s
Stitch up to point (6)
ii
* Raise needle,
i i l
* Raise presser foot and
remove garment
5I 2Ifrom
machine,
*
Clip
thread
ends.
* Carefully cut buttonhole
opening with a
seam ripper or small,
sharp scissors.
ADJUSTING BALANCE
OF
. tBUTTONHOLE
it
the two stitching
sides of your buton
hole are unequal, turn the stitch balance
ring (7), located behind the selector dial
On some heavy weight
fabrics an
adjustment might be necessary,
b8n * It the right
side of stitching is too open
(8), turn stitch
balance ring slightly to
the right until both sides are
equal.
n
If the left side
of stitching
is too open
(9), turn
stitch balance ring
slightly to
K H
the left until
both sides are equal
30