Singer 4671 - Page 5

Principal Parts
1 Hand
Wheel provides a means for
14. Presser Foot Lifter, at the
back of
raising or lowering the needle. machire, lets you raise and lower
presser foot.
2. Bobbin Winder
lets you till the boDbin
with thread
quickly and easiy 15. Thread
Cutter is built into face plate
cover
for convenience
and
safety.
3, Pattern Display Panel
shows a vanr
ely of patterns available for your
16 Slide Plate opens for easy rernoval
sewing needs
and replacement
of bobbin
4. Friction-Free Spool Pin and Cap 17. Feed System moves
fabric under
hold the lop thread supply
and allow preer foot.
it to unwind
smoothly as the spool presser oot
does not turn.
18. Presser
Foot holds fabric against the
5. Stitch
Width
Lever
controls
the width
teed
system
and snaps
on
and off
of patterns and sets the needle for
straight
stitching
19.
Bed
is the
work
surface
of the
mnachine
6. Snap-In Thread Guide helps to insure
a smooth
flow
of thread
from the
20. Stitch
Length
Lever
allows for
a
spool
to the tension,
variety
of stitch lengths.
7 Bobbin Winder Tension Disc
pro 21. Power and Light
Switch turns on
vides thread tension
for bobbin the machine
and sewing light at the
winding,
sarne time
8. Auto Needle Thread Tension Lever 22. Reverse Lever
provides either
controls top thread tension
momentary or continuous reverse
tabric movement
9. Face Plate
s a removable cover
protecting movable parts
and sewinrg 23. Pattern Selector Dial turns directly
light
to any of the
patterns. plus button-
10.
Sewing
Light
illuminates
sewing
hole,
showni
on
tthe pattern
display
area
panel
11. One-Way
Needle
Clamp
holds
24.
Stitch
Balance
Ring adjusts
appear
needle
in machine
acid prevents
ance ot Special
Stitch patterns and
incorrect nserlion
buttonholes,
12. Needle Plate supports
she fabric 25. Electrical Power
Cord connects
during sewing
rnachine
to your
electrical
outlet
13. Removable Extension
Table lets you 26. Speed
Controller, designed for safety
change the machine
bed from flat to and convenience,
regulates the elec-
free arm
tronic solid state speed control
3