Singer 591D300A - Preparing to Sew; Sewing

PREPARING TO SEW
Hold end of needle thread with left
hand very lightly. Then turn the
machine pulley over toward you
slowly until the needle moves down
and up. Pull on the needle thread
and the bobbin thread will come up
through the hole in the throat plate
as shown in Fig. 14. Place both
threads under the presser foot prior
to sewing.
SEWING
Place the material under the pres
ser foot and lower the presser foot.
You are now ready to sew — quick
ly, smoothly and easily.
Stop the machine when the needle
bar has just started to come down
for best material removal. Raise the
presser foot, draw the work behind
the presser foot and cut the threads
close to the work.
Fig. 14
From the library of: Superior Sewing Machine & Supply LLC