Singer 591D300A - Adjusting the Amount of Feed of the Feed Roller; Adjusting the Pressure of the Feed Roller

ADJUSTING THE AMOUNT OF
FEED OF THE FEED ROLLER
591D303A
Adjust the machine to the desired
stitch length, then set the adjust
able crank A on the puller feed
device to a matching
stitch length
or slightly larger
if required by the
application. (Fig. 22).
ADJUSTING THE PRESSURE OF
THE FEED ROLLER
591D303A
Pressure of the feed roller
should be as light as possible,
while still sufficient to insure
proper feeding.
Adjust the pressure by turning
the feed roller pressure spring
adjusting seat A as shown in
Fig.
23.
W
MORE
PRESSURE
0
Fig. 22
&
Fig. 23
13
From the library of: Superior Sewing Machine & Supply LLC