Singer 7285Q - Helpful Messages; Helpful Messages for User

Page 37/38
Original issue
May, 2014
Service Manual
7285Q
Model
20. Helpful messages
1. Helpful messages for user
If an incorrect operation is made, a helpful message will be display. When a helpful
Message is displayed; fix the problem following the instructions below.
Bobbin winder is moved to right (operating mode) during sewing.
*Check bobbin winder and move it to left.
Buttonhole lever is not lowered or raised.
*Lower buttonhole lever when sewing buttonholes.
*Raise buttonhole lever when sewing stitch patterns.
Foot control plug is pulled out, while operating foot control.
*Push in foot control plug.
Machine locked up due to thread entangled with bobbin case or
rotation interrupted forcibly.
*Turn off power switch and eliminate the problem that caused the
machine to stop.
Bobbin winder is in operation.
*Move bobbin winder to left when it is not used.
Reverse/tacking stitch button is pushed, while buttonhole stitch is
selected.
*Tacking stitch is made automatically after buttone hole stitch is
completed. It is not necessary to push the reverse/ tacking stitch
button.