Class 99 & 99K
Adjustment and Operation
of the Binder
The edge to be bound is guided into the
center of the scroll. Stitching is
positioned close to the edge of the
binding by adjusting the scroll portion of
the attachment.
Loosen the adjusting screw and
move the scroll to the right to
bring the stitching closer to the
binding edge. For a wider
adjustment, move the scroll to the
left.
ā
Be sure that the screw is well tightened
after making an adjustment.
Never pull the binding as it feeds
through the scroll. Allow the
attachment to do the work. Merely
guide the edge to be bound well into
the center of the scroll as you stitch.
Page 36
Table of Contents | Previous Page | Next Page
To Next Page
Loading...
