Singer Elite CE677 - Change the Presser Foot

2
1
16 – Preparations
English
16 – Preparations
English
1. Make sure that the needle is in the highest position and the
presser foot is lifted. The presser foot release button
extends out the back of the presser foot holder. Press this
lever to release the presser foot.
2. To attach a presser foot to the holder, place the desired presser
foot with its pin directly under the slot in the presser foot
holder. Lower the presser foot lifter and the presser foot
will snap into place.
Note: If you nd it difcult to place the presser foot in the co-
rrect position, keep the release button pressed while lowering
the presser foot. Use your thumb to carefully guide the presser
foot into the correct position and it will snap into place.
Change the Presser Foot